Save 15% on the cost of a new quick attach and release frame and carriage hook plate, or receive £100 part exchange value against your existing Grab-O-Matic frame if you order before the end of 31st May 2017.

This unique safety innovation eliminates the need for the fork lift truck driver to dismount from the cab to secure the drum grabs to the forks with T bolts and chains, thereby reducing the risk of accidents, saving time and increasing productivity!

Please email us directly at sales@stclare-engineering.co.uk quoting code QR 0417 to receive the discounted offer.

The only information we require when ordering is the size and type of carriage your trucks have and the length, width and thickness of the forks.The Grab-O-Matic Quick Attach/Release system was developed to increase safety when securing mechanical fork attachments to the forks of a fork truck.

Quick Attach -Release System x700

How does it work?

A carriage hook plate is bolted to the centre of the fork truck carriage. This can stay on permanently as it does not interfere with the normal lifting and moving of pallets and is only 300mm wide.

When the forks are inserted fully into the fork pockets and raised a sprung loaded lever locks behind the carriage hook plate and will only release when the unit is lowered to the ground. This reverses the action and the forks can be withdrawn from the unit.

What are the benefits?

The Grab-O-Matic Quick Attach and Release System was developed to save time and increase safety when securing mechanical fork attachments to a fork truck.

The greatest savings are made if the truck driver is constantly changing fork attachments or moving from pallets back to drum grabs several times a day. The return on the initial investment is very quick due to the significant time savings realised and the corresponding safety benefits.

Traditional methods involve the truck driver dismounting from his cab to tighten the T bolts or secure the chains each time the fork attachment is to be changed. However, because this involves extra work and is time consuming, drivers will often neglect to do this resulting in a safety risk.

If the fork truck needs to brake suddenly, the load will fly off the front of the forks with the potential risk of the drum(s) splitting and causing an expensive clean-up operation. In the worst case scenario someone can get seriously hurt.

With the Grab-O-Matic QR System the attachment is always secured to the fork truck.

To secure the fork attachment, just drive into the fork pockets, raise the carriage and the unit is automatically secured. To release just stop, lower and reverse and the lever automatically disengages from the fork truck.

Key Benefits:

  • Eliminates the need for the fork truck driver to dismount from his cab to secure the drum grabs to the forks with traditional methods such as ‘T’ bolts or chains
  • Saves valuable time when switching attachments
  • Safer as the QR System reduces the risk of accidents as the attachments are always secured to the fork truck
  • Increased productivity
  • Compatible with all types of fork truck carriage including side shifts
  • The Quickest, Simplest and Safest way to secure attachments to the fork truck
  • Stainless Steel and ATEX units also available

The Quick Attach and Release Drum Handling frames are universal with all current Grab-O-Matic pillars and gripping heads and is a safe, secure and efficient way to attach the Grab-O-Matics to any fork truck.

It is available for most of the Grab-O-Matic range of fork truck attachments, Drum Rotators, Waist Gripper Drum Handlers, Snow Ploughs, Base Grippers and Drum Cages and can be incorporated on many bespoke items if required. Stainless Steel or ATEX units can also be supplied with a Quick Attach and Release System.

The system has been extensively proven in the field over a number of years with in excess of 100 units currently in use, all with positive feedback from the end users due to the ease of use, cost savings in time and increased safety.

If you are looking for a cost-effective way to save time, increase productivity and safety, please contact us to discuss your options for a new Drum Handler or Fork Truck Attachment fitted with the unique Quick Attach and Release Drum Handling System.

Tel: 02380 643402
Fax: 02380 642189
Email: sales@stclare-engineering.co.uk
Web: www.stclare-engineering.co.uk